• Threaded closure GLS 80 without stirring feedthrough, MyFerm III, 4 x GL 18

    The picture may be different from the article and can include supply, which is not in the standard scope.

    This threaded connector is used to attach the heat exchanger to fermenters that are to be operated with a magnetic stirrer.(MyFerm III).
    There are 2 further connections available for e.g. hoses.

    4* Screw cap GL 18 with EPDM seal
    Description value
    WEEE obligation: No
    Fermentation vessel for bioreactor MyFerm 2l Fermentation vessel with.... ... Wide-necked...

    Fermentation vessel for bioreactor MyFerm - 10 l Fermentation vessel with.... ... Wide-necked...

    Fermentation vessel for bioreactor MyFerm 20 l Fermentation vessel with.... ... Wide-necked GL...

    Magnetic stirrer for bioreactor MyFerm III - 2l to 5 l volume Flat stainless steel magnetic...

    Heat exchanger without stirring bushing for bioreactors MyFerm III 2-5 litres Powerful heat...

    Heat exchanger without stirring bushing for bioreactors MyFerm III 10-15 litres Powerful heat...

    Heat exchanger without stirring bushing for bioreactors MyFerm III 15-20 litres Powerful heat...

    Exhaust air filter/ ventilation filter with GL 18 connection for bioreactors MyFerm complete with...

    Fermentation vessel for bioreactor MyFerm III - 5 l Fermentation vessel with.... ......

    Fermentation vessel for bioreactor MyFerm - 10 l Fermentation vessel with.... ... Wide-necked...

    Bioreactor 2 l MyFerm Glass reactor with a volume of 2 litres, e.g. for incubating microorganisms...

    Bioreactor 10 l MyFerm Glass reactor with a volume of 10 litres, e.g. for incubating...