Heat exchanger without stirring bushing for bioreactors MyFerm III 10-15 litres

The picture may be different from the article and can include supply, which is not in the standard scope.

Powerful heat exchanger for temperature control of the fermenter via an external thermostat.

Suitable for MyFerm models with magnetic stirrer where lid closures without stirring feed-through are used.

Necessary accessories:
1* Threaded cap for GLS 80 bottles L14023101
2* Screw fitting 886762954
Description value
WEEE obligation: No
Thermostat with 2 l bath volume, MyFerm For temperature control of MyFerm bioreactors....

Screw fitting with perforated cap made of PPS, GL 18, outer diameter 6 mm Used for connecting...

Threaded closure GLS 80 without stirring feedthrough, MyFerm III, 4 x GL 18 This threaded...

Reaktionsgefäß MyFerm VI, 1 Liter MyFerm Basic-Reaktionsgefäß "B" ohne Schikanen und zusätzliche...

MyFerm VI reaction vessel, 3.5 litres MyFerm Basic reaction vessel "B" without baffles and...

Reaktionsgefäß MyFerm VI, 5 Liter MyFerm Basic-Reaktionsgefäß "B" ohne Schikanen und zusätzliche...

Fermentation vessel for bioreactor MyFerm - 10 l Fermentation vessel with.... ... Wide-necked...

Reaktionsgefäß MyFerm VI, 10 Liter MyFerm Basic-Reaktionsgefäß "B" ohne Schikanen und...

Reaktionsgefäß MyFerm VI, 20 Liter MyFerm Basic-Reaktionsgefäß "B" ohne Schikanen und...

Bioreactor 10 l MyFerm Glass reactor with a volume of 10 litres, e.g. for incubating...