• Powdergauge 1, automatic time measurement of the flow rate DIN-EN-ISO-4490/14629

    The picture may be different from the article and can include supply, which is not in the standard scope.

    The elapsed times for the flow of 50.0 g of powder should be measured with this device, which can record the flow of the powder and automatically record the elapsed time at the same time. Automatic time recording leads to more accurate flowability values than manual time recording. In addition, the deviation of the automatically recorded value for flowability is smaller than the manually recorded value.


    The individual deviations caused by manually determining the time with a stopwatch are reduced.

    Normative reference:
    DIN-ISO-14629-Fluidity
    DIN-EN-ISO-4490-Hall-Flowmeter
    ASTM B213-13-Flow rate

    - Averaging of up to 9 measurements
    - Data storage on SD card with time stamp
    - Validation routine
    - Stopwatch check
    - Display accuracy 0.01 s
    - Time range 4-999 s

    Power supply 230 V/ 50 Hz
    Accessories for Hall Flowmeter: L50566063, L50566064,53468002
    Option: Calibration certificate: 904138940
    Description value
    WEEE obligation: Yes
    WEEE registration number: DE87387371
    WEEE brand according to EAR register: HLL
    WEEE type of equipment: Small equipment for use in other than private households only
    Calibration certificate for timing devices "Stopwatch, Stoptop" and Powdergauge". The calibration...

    Apparatus Bulk density ISO 23145 and flowability ISO14629 of ceramic powders With the help of...

    Apparatus for determining the flow rate, Hall flowmeter according to DIN-EN-ISO-4490 The...

    Apparatus for flow rate,Hall Flowmeter DIN-EN-ISO-4490/ Fill density ISO 3923 With the help...