The picture may be different from the article and can include supply, which is not in the standard scope.
Temperature sensor Pt-100 for MyFerm 5+10l diode plug
Sipariş No..: L14020923D
Fiyat isteyiniz için 1 package
- Assortment: Landgraf HLL
- Ürün Kodu: L14020923D
- Kategori: Temperature sensors
Show all Temperature sensors from Landgraf HLL - Geçerlilik: 31.03.2027
- Son güncelleme: 31.03.2026
- Benzer ürünler: show (7)
Sensor for recording the actual temperature of the medium in the fermentation vessel.
In combination with our temperature control unit, a temperature control can be set up to maintain a set temperature.
Sensor length: 330 mm
Sensor diameter: 3.0 mm
Suitable for fermenters: 2000-5000 ml
Material stainless steel.
Cable length=1.5 m
Diode plug
Optional:
Glass jacket for temperature probe
L1402350*
Make sure to calibrate the sensors in the thermostat's software.
Instrument software must be equipped with temperature control 886710040S.
Screw connections for fermentation vessel
886762934- GL 18, 3 mm or
886763034- GL 25, 3 mm
In combination with our temperature control unit, a temperature control can be set up to maintain a set temperature.
Sensor length: 330 mm
Sensor diameter: 3.0 mm
Suitable for fermenters: 2000-5000 ml
Material stainless steel.
Cable length=1.5 m
Diode plug
Optional:
Glass jacket for temperature probe
L1402350*
Make sure to calibrate the sensors in the thermostat's software.
Instrument software must be equipped with temperature control 886710040S.
Screw connections for fermentation vessel
886762934- GL 18, 3 mm or
886763034- GL 25, 3 mm
| Description | value |
|---|---|
| WEEE obligation: | No |
Screw fitting with perforated cap made of PPS, GL 18, outer diameter 6 mm Used for connecting...
Electronic temperature controller Electronic laboratory controller, table-top unit, freely...
Glass jacket for temperature sensor MyFerm 10 l
Screw fitting with perforated cap made of PPS, GL 18, outer diameter 6 mm Used for connecting...