• Temperature sensor Pt-100 for MyFerm 5+10l

    The picture may be different from the article and can include supply, which is not in the standard scope.

    Sensor for detecting the actual temperature of the medium in the fermentation vessel.
    In combination with our temperature control unit, a temperature control can be set up to maintain a set temperature.

    Sensor length: 330 mm
    Sensor diameter: 3.0 mm
    Suitable for fermenters: 2000-5000 ml
    Material stainless steel.
    Cable length=1.5 m
    Lemo plug

    Optional:
    Glass sheath for temperature sensor
    L1402350*

    Make sure to calibrate the sensors in the software of the thermostat.
    Device software must be equipped with temperature control 886710040S.

    Screw connections for fermentation vessel
    886762934- GL 18, 3 mm or
    886763034- GL 25, 3 mm
    Description value
    WEEE obligation: No
    Temperature control for bioreactors MyFerm / programme extension This programme extension is...

    Screw fitting with perforated cap made of PPS, GL 18, outer diameter 6 mm Used for connecting...

    Glass jacket for temperature sensor MyFerm 10 l

    Thermostat with 2 l bath volume, MyFerm For temperature control of MyFerm bioreactors....

    Cold-heat bath thermostat, volume: 4.5l, MyFerm For temperature control of MyFerm bioreactors...

    Screw fitting with perforated cap made of PPS, GL 18, outer diameter 6 mm Used for connecting...

    Electronic temperature controller Electronic laboratory controller, table-top unit, freely...

    Bioreactor 10 l MyFerm Glass reactor with a volume of 10 litres, e.g. for incubating...