The picture may be different from the article and can include supply, which is not in the standard scope.
Temperature sensor Pt-100 for MyFerm 20 l Lemo plug
Sipariş No..: L14020924
Fiyat isteyiniz için 1 package
- Assortment: Landgraf HLL
- Ürün Kodu: L14020924
- Kategori: Temperature sensors
Show all Temperature sensors from Landgraf HLL - Geçerlilik: 31.03.2027
- Son güncelleme: 31.03.2026
- Benzer ürünler: show (7)
for temperature control, directly in the medium of the reaction vessel.
Temperature control via an external thermostat.
Probe length = approx. 500 mm
Probe diameter = 6 mm
Material stainless steel.
Cable length = 1.5 m
Lemo plug
Suitable for fermenter:
MyFerm I 20L L14020001
MyFerm III
Necessary accessories:
Thermostat: e.g. 886710040
Temperature control via an external thermostat.
Probe length = approx. 500 mm
Probe diameter = 6 mm
Material stainless steel.
Cable length = 1.5 m
Lemo plug
Suitable for fermenter:
MyFerm I 20L L14020001
MyFerm III
Necessary accessories:
Thermostat: e.g. 886710040
| Description | value |
|---|---|
| WEEE obligation: | No |
Temperature control for bioreactors MyFerm / programme extension This programme extension is...
Screw fitting with perforated cap made of PPS, GL 18, outer diameter 6 mm Used for connecting...
Glass jacket for temperature sensor MyFerm 20 l
Thermostat with 2 l bath volume, MyFerm For temperature control of MyFerm bioreactors....
Cold-heat bath thermostat, volume: 4.5l, MyFerm For temperature control of MyFerm bioreactors...
Screw fitting with perforated cap made of PPS, GL 18, outer diameter 6 mm Used for connecting...
Electronic temperature controller Electronic laboratory controller, table-top unit, freely...
Bioreactor MyFerm 20 l Glass reactor with a volume of 20 litres, e.g. for incubating...