Bioreactor 5 l MyFerm

The picture may be different from the article and can include supply, which is not in the standard scope.

Glass reactor with a volume of 5 litres e.g. for incubating microorganisms and cells.
Consisting of chemically resistant borosilicate glass with highest durability.

All parts in contact with the medium are made of glass or PTFE/PP.
The bioreactor is completely autoclavable at 121°C.
The temperature control of the medium is achieved via the available temperature control coil in conjunction with an external circulation thermostat.
To ensure optimal mixing with the aid of a magnetic stirrer, 3 baffles are incorporated into the glass reactor.

In addition to feeding, the feedthroughs can be used for the following purposes, for example:

- Gassing
- Exhaust air filtration using external PTFE filters
- Sampling and reactor emptying
- process monitoring

Dimensions:
Nominal volume: approx. 5 L
Height: approx. 360 mm
Diameter: 190mm

The bioreactor is to be assembled in the configuration principle!
Description value
Nominal hacim: 5 l
Description value
WEEE obligation: No
Bioreactor 2 l MyFerm Glass reactor with a volume of 2 litres, e.g. for incubating microorganisms...

Bioreactor 10 l MyFerm Glass reactor with a volume of 10 litres, e.g. for incubating...

Bioreactor 15 l all-glass reactor Glass reactor for incubation of microorganisms and cells made...

Bioreactor MyFerm 20 l Glass reactor with a volume of 20 litres, e.g. for incubating...

Fermentation vessel for bioreactor MyFerm III - 5 l Fermentation vessel with.... ......

Magnetic stirrer for bioreactor MyFerm III - 2l to 5 l volume Flat stainless steel magnetic...

Heat exchanger without stirring bushing for bioreactors MyFerm III 2-5 litres Powerful heat...

Thermostat with 2 l bath volume, MyFerm For temperature control of MyFerm bioreactors....

Cold-heat bath thermostat, volume: 4.5l, MyFerm For temperature control of MyFerm bioreactors...

Temperature control unit for bioreactor MyFerm Temperature control unit for bioreactor...

Peristaltic pump iPump2F, flow rates up to 700 ml/min, dosing capacity The iPump2F peristaltic...

Temperature sensor Pt-100 for MyFerm 2l Sensor for detecting the actual temperature of the medium...

Aeration filter cartridge 150 ym for aeration of cultures, MY Ferm 2/5 l For MyFerm 2000 ml and...

Exhaust air filter/ ventilation filter with GL 18 connection for bioreactors MyFerm complete with...

Lifting tube for sampling bioreactor MyFerm 5l complete with threaded connection and 9 mm screw...