• Exhaust air condensate cooler for microwave MW 4000

    The picture may be different from the article and can include supply, which is not in the standard scope.

    Exhaust air condensation cooler

    The exhaust air condensation cooler is used to retain moisture in the exhaust air.

    It is a coil cooler with multiple temperature control coils.

    Depending on the temperature of the cooling medium and the humidity of the exhaust air, a retention rate of 60-80 % can be assumed.

    The cooler has hose connections for operating water, waste water and condensate.

    For temperature control, we recommend a circulating cooler with high cooling capacity.

    The exhaust air condensation cooler is screwed to the exhaust air spigot by means of a screw connection and a crimp seal. The stand bracket is used as an additional fastening.

    Complete with unit screw connections and hose connections.

    Material: Clean Save laboratory glass

    Necessary accessories:

    Set - Mounting system for unit Art: 416773220
    Consisting of sleeves and support rods for rear mounting of the condensation cooler on the unit.
    Description value
    WEEE obligation: No