The picture may be different from the article and can include supply, which is not in the standard scope.
Peristaltic pump iPump6S-Y, flow rates up to 12000 ml/min
Sipariş No..: 106723191
Fiyat isteyiniz için 1 Adet
- Assortment: Landgraf HLL
- Ürün Kodu: 106723191
- Kategori: Peristaltik pompaları
Show all Peristaltik pompaları from Landgraf HLL - İndeks: Peristaltik pompalar
- Geçerlilik: 31.03.2027
- Son güncelleme: 31.03.2026
- Benzer ürünler: show (2)
The iPump6S-Y peristaltic pump is built for high volume pumping in harsh environments. The drive can be combined with different pump heads for up to 2 channels. The motor can be adjusted in the range of 40 up to 600 RPM speed. Depending on the pump head and tubing, flow rates of 600-12000 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The setpoints can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.
The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The stainless steel housing is easy to clean and offers IP 54 protection against dust and splash water.
Flow rate: 600- 12000 ml/min
Accuracy: 0.5%.
Speed: 40-600 UPM
Accuracy: 1 UPM
Pump direction: Forward, Reverse
Time control: 0,1s-99 h
Interface: RS-485 External signals: Start/Stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Scope of delivery:
Pump drive without head
The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The stainless steel housing is easy to clean and offers IP 54 protection against dust and splash water.
Flow rate: 600- 12000 ml/min
Accuracy: 0.5%.
Speed: 40-600 UPM
Accuracy: 1 UPM
Pump direction: Forward, Reverse
Time control: 0,1s-99 h
Interface: RS-485 External signals: Start/Stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Scope of delivery:
Pump drive without head
| Description | value |
|---|---|
| Maksimal pompalama hacmi: | 12 l/min |
| Maksimal dönme hızı: | 600 upm |
| Güç kaynağı: | 230 V AC |
| Çıkış sinyal tipi: | Analog |
| Çıkış sinyal tipi: | RS 485 |
| Description | value |
|---|---|
| WEEE obligation: | Yes |
| WEEE registration number: | DE87387371 |
| WEEE brand according to EAR register: | HLL |
| WEEE type of equipment: | Small equipment for use in other than private households only |
Pump head YZ15A, 1 channel, 3 rollers, up to 2416 ml/min, hose 1.6 mm wall The YZ15A pump head...
Pump head YZ25A, 1 channel, 3 rollers, up to 1856 ml/min, hose 2.4 mm wall The YZ25A pump head...
Pump head KZ25A, 1 channel, 3 rollers, up to 6061 ml/min, hose 2.4 mm wall The KZ25A pump head...
Foot switch for iFluid peristaltic pumps The pump can be started and stopped with the switch. The...
Control module RS485 The module connector enables the standard interface to be controlled via an...
Control module 0-10V The module connector enables the standard interface to be controlled via a...
Control module 4-20 mA The module connector enables the standard interface to be controlled via a...