Peristaltic pump iPump2F, flow rates up to 700 ml/min, dosing capacity

The iPump2F peristaltic pump was built for dosing tasks. The drive can be combined with different pump heads for up to 10 channels. The motor speed can be adjusted in the range from 0.1 up to 200 rpm. Depending on the pump head and tubing, flow rates of 0.0001-825 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The setpoints can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.

The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The ABS housing is easy to clean and provides IP 31 protection for the unit.

Flow rate: 0.0001- 825 ml/min
Accuracy: 0,5%
Speed: 0.1-200 RPM
Accuracy: 1 UPM
Pump direction: Forward, Reverse
Dosing volume: 0.1 ml - 99.9 l
Repetitions: 1-999
Pause time: 1-999 s
Display: Graphic, two lines
Control: Menu-driven
Interface: RS-485 External signals: Start/Stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 202×160×239 mm (d*w*h)

Scope of delivery:
Pump drive without head