• Peristaltic pump iPump2S-M, drive IP54 variable up to 200 RPM

    The picture may be different from the article and can include supply, which is not in the standard scope.

    The iPump2S-M peristaltic pump was built as a pump for rough use with changing pump rates. The drive can be combined with different pump heads for up to 10 channels. The motor speed can be adjusted in the range from 0.1 up to 200 RPM. Depending on the pump head and tubing, flow rates of 0.0001-825 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The setpoints can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.

    The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The metal housing is easy to clean and offers IP 54 protection against penetrating splash water and dust. The small dimensions allow space-saving installation.

    Flow rate: 0.0001- 825 ml/min
    Speed: 0.1-200 RPM
    Accuracy: 1 UPM
    Pump direction: Forward
    Time control: 0,1s-99 h
    Display: 3-digit speed display
    Interface: RS-485
    External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
    Ambient temperature: 0-40°C
    Humidity: <80% RH
    Size: 140×96×96 mm (d*w*h)

    Scope of delivery:
    Pump drive without head
    Description value
    Maksimal pompalama hacmi: 700 ml/min
    Maksimal dönme hızı: 200 upm
    Güç kaynağı: 230 V AC
    Çıkış sinyal tipi: Analog
    Çıkış sinyal tipi: RS 485
    Description value
    WEEE obligation: Yes
    WEEE registration number: DE87387371
    WEEE brand according to EAR register: HLL
    WEEE type of equipment: Small equipment for use in other than private households only
    Peristaltic pump iPump2S, drive variable up to 200 rpm The iPump2S peristaltic pump was built as...

    Pump head DG1A, 1 channel, 6 rollers, up to 75 ml/min The pump head DG1A with 6 rollers and a...

    Pump head DG1B, 1 channel, 10 rollers, up to 54 ml/min The pump head DG1B with 10 rollers and one...

    Pump head DG2A, 2 channel, 6 rollers, up to 75 ml/min The pump head DG2A with 6 rollers and 2...

    Pump head DG2B, 2 channel, 10 rollers, up to 54 ml/min The pump head DG2B with 10 rollers and 2...

    Pump head DG4A, 4 channel, 6 rollers, up to 75 ml/min The DG4A pump head with 6 rollers and 4...

    Pump head DG4B, 4 channel, 10 rollers, up to 54 ml/min The pump head DG4B with 10 rollers and 4...

    Pump head DG6A, 6 channel, 6 rollers, up to 75 ml/min The DG6A pump head with 6 rollers and 6...

    Pump head DG6B, 6 channel, 10 rollers, up to 54 ml/min The pump head DG6B with 10 rollers and 6...

    Pump head DG8A, 8 channel, 6 rollers, up to 75 ml/min The DG8A pump head with 6 rollers and 8...

    Pump head DG8B, 8 channel, 10 rollers, up to 54 ml/min The pump head DG8B with 10 rollers and 8...

    Pump head DG12A, 12 channel, 6 rollers, up to 75 ml/min The DG12A pump head with 6 rollers and 12...

    Pump head DG12B, 12 channel, 10 rollers, up to 54 ml/min The DG12B pump head with 10 rollers and...

    Pump head YZ15A, 1 channel, 3 rollers, up to 2416 ml/min, hose 1.6 mm wall The YZ15A pump head...

    Pump head YZ25A, 1 channel, 3 rollers, up to 1856 ml/min, hose 2.4 mm wall The YZ25A pump head...

    Foot switch for iFluid peristaltic pumps The pump can be started and stopped with the switch. The...

    Control module RS485 The module connector enables the standard interface to be controlled via an...

    Control module 0-10V The module connector enables the standard interface to be controlled via a...

    Control module 4-20 mA The module connector enables the standard interface to be controlled via a...