The picture may be different from the article and can include supply, which is not in the standard scope.
Peristaltic pump iPump6S-M, drive IP54 variable up to 600 RPM
Sipariş No..: 106723146
Fiyat isteyiniz için 1 Adet
- Assortment: Landgraf HLL
- Ürün Kodu: 106723146
- Kategori: Peristaltik pompaları
Show all Peristaltik pompaları from Landgraf HLL - İndeks: Peristaltik pompalar
- Geçerlilik: 31.03.2027
- Son güncelleme: 31.03.2026
- Benzer ürünler: show (3)
- alternative article: show
The iPump6S-M peristaltic pump was built as a pump for rough use with changing pump rates. The drive can be combined with different pump heads for up to 2 channels. The motor speed can be adjusted in the range of 0.1 up to 600 RPM. Depending on the pump head and tubing, flow rates of 0.0001-2416 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The set values can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.
The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The metal housing is easy to clean and offers IP 54 protection against penetrating splash water and dust.
Flow rate: 0.0001- 2416 ml/min
Speed: 0.1-600 RPM
Accuracy: 1 UPM
Pump direction: Forward
Time control: 0,1s-99 h
Display: 3 digit speed display
Interface: RS-485
External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 285×207×180 mm (d*w*h)
Scope of delivery:
Pump drive without head
The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The metal housing is easy to clean and offers IP 54 protection against penetrating splash water and dust.
Flow rate: 0.0001- 2416 ml/min
Speed: 0.1-600 RPM
Accuracy: 1 UPM
Pump direction: Forward
Time control: 0,1s-99 h
Display: 3 digit speed display
Interface: RS-485
External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 285×207×180 mm (d*w*h)
Scope of delivery:
Pump drive without head
| Description | value |
|---|---|
| Maksimal pompalama hacmi: | 1,856 l/min |
| Maksimal dönme hızı: | 600 upm |
| Güç kaynağı: | 230 V AC |
| Çıkış sinyal tipi: | Analog |
| Çıkış sinyal tipi: | RS 485 |
| Description | value |
|---|---|
| WEEE obligation: | Yes |
| WEEE registration number: | DE87387371 |
| WEEE brand according to EAR register: | HLL |
| WEEE type of equipment: | Small equipment for use in other than private households only |
Peristaltic pump iPump6S, drive variable up to 600 rpm The iPump6S peristaltic pump was built as...
Pump head YZ15A, 1 channel, 3 rollers, up to 2416 ml/min, hose 1.6 mm wall The YZ15A pump head...
Pump head YZ25A, 1 channel, 3 rollers, up to 1856 ml/min, hose 2.4 mm wall The YZ25A pump head...
Foot switch for iFluid peristaltic pumps The pump can be started and stopped with the switch. The...
Control module RS485 The module connector enables the standard interface to be controlled via an...
Control module 0-10V The module connector enables the standard interface to be controlled via a...
Control module 4-20 mA The module connector enables the standard interface to be controlled via a...