Micro peristaltic pump iPump3Q, up to 513 ml/min, time control

The picture may be different from the article and can include supply, which is not in the standard scope.

The iPump3Q peristaltic pump is a cost-effective device with a timer control for realising more complex pumping tasks, also with external control. The flow rates and times are preset via buttons and stored even when the unit is switched off. The pump is mounted in an L-frame and can be easily installed in units. Depending on the head and tubing, flow rates of 0.2-513 ml/min can be realised. The housing is easy to clean and provides IP 31 protection for the unit.

Flow rate: 0.2-513 ml/min
Speed: 0.1-300 UPM
Pump direction: Forward
Time control: 0,1s-99 h
Display: 3-digit speed display
Interface: RS-485
External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 140×96×96 mm (d*w*h)

LIefer scope:
Pump drive without head
Description value
Maksimal pompalama hacmi: 513 ml/min
Maksimal dönme hızı: 300 upm
Güç kaynağı: 230 V AC
Çıkış sinyal tipi: Analog
Çıkış sinyal tipi: RS 485
Description value
WEEE obligation: Yes
WEEE registration number: DE87387371
WEEE brand according to EAR register: HLL
WEEE type of equipment: Small equipment for use in other than private households only
Pump head JZ15A, 1 channel, 2 rollers, up to 490 ml/min, hose 1.6 mm wall The JZ15A pump head...

Pump head JZ15B, 1 channel, 4 rollers, up to 120 ml/min, hose 1.6 mm wall The JZ15B pump head...

Foot switch for iFluid peristaltic pumps The pump can be started and stopped with the switch. The...

Control module RS485 The module connector enables the standard interface to be controlled via an...

Control module 0-10V The module connector enables the standard interface to be controlled via a...

Control module 4-20 mA The module connector enables the standard interface to be controlled via a...