• Deionizer - SG-15000-SK, 100 Liter, Quick coupling, empty container

    The picture may be different from the article and can include supply, which is not in the standard scope.

    SG-15000-SK Deionizer, 100 Liter
    Deionizer with quick coupling (SK), empty container without resin.
    These high-quality stainless steel deionizer (1.4571) can be operated with a working pressure of max. 10 bar. Our optimized channel flow ensures superior resin bed usage. 

    Technical data:
    Connections cartridge: Quick connect coupler DN 10
    Nominal capacity: 15000 l up to 20µS/cm at 10°dH total salt content
    Perm. water temp. max.: 40°C
    Max. flow rate: 1500 l/h
    Resin capacity: 100 l
    Max. pressure: 10 bar
    Diameter: 360 mm
    Tank height: 1111 mm

    Conductivity meters and tubing (or electrodes) are available separately.
    Description value
    Ürün tipi tarifi: Ionenaustauscher
    Reg. Trademark: Evoqua®
    Nominal hacim: 100 l
    Çap: 360 mm
    Maksimum çalışma basıncı: 10 bar
    Çıkış: 1500 l/h
    Malzeme: Paslanmaz çelik
    Yükseklik: 1,111 m
    Description value
    WEEE obligation: No
    WEEE registration number: DE 91825945
    Mixed bed resin MB400, 25L Accessories for deionizer, Mixed bed resin 0.5 val/l (25 l bag) /...

    CONDUCTIVITY SENSOR C=0.2;TC;POM/EPDM Conductivity sensor c = 0.2 with TC R 1/2“  Conductivity...

    Water guard R3/4", Brass, 8m³/h, 230VAC Water guard G 1“i/i, Brass, 8 m³/h, 230 V For the safe...

    Water guard, G 3/4" Water guard G3/4“i/o, MS, KV 1.2 m³/h, 230 V Device to enable a safe...

    Strainer ¾‘‘, 10bar Strainer, G3/4", 10bar, Sieve 0.11mm Through pre-installed strainer,...

    Conductivity meter P1-50 WA, analog Accessories for deionizer Conductivity meter for wall...

    Conductivity meter LFW-200, digital Conductivity meter for wall mounting with 2-digit LCD display...

    Hose set for SG...quick coupling with electrode, temp.compensated Hose Set  for SG.....SK, with...

    Hose set for deionizers with quick coupler connection (SK) Hose set for quick coupling connection...

    Hose set for all deionizers with quick coupler connection (SK) Hose set SK w/o sensor for...

    Conductivity sensor c = 0.2 Conductivity sensor C=0.2, w/o TC, R 1/2“ male thread LF-Electrode...

    Distribution block VB4 Distribution block VB4, POM, 4 valves This distribution block enables...

    Strainer/ Backflow preventor Flushing filter ¾“ Flushing filter / Backflow preventer Combi ¾ “...

    Hose set for deionizers with quick coupler connection (SK) Hose set for quick coupling connection...