The picture may be different from the article and can include supply, which is not in the standard scope.
Double softener VM 60
SipariÅŸ No..: W3T197538
Fiyat isteyiniz için 1 Adet
- Assortment: Evoqua Water Technologies
- Ürün Kodu: W3T197538
- Kategori: Laboratuvar ekipmanları için yedek parçalar
Show all Laboratuvar ekipmanları için yedek parçalar from Evoqua Water Technologies - İndeks: spare parts for laboratory instruments
- Paket: 1 Adet
- Geçerlilik: 31.12.2026
- Son güncelleme: 31.12.2025
- Benzer ürünler: show (2)
Dual Softener VM 60
These fully automated, quantity-controlled, mechanical twin water softening systems offer, among other aspects, continuous availability of soft water with low salt and water consumption and very easy installation. Thanks to its synthetic components the system is non-corroding. The systems are monitored with a hydraulic control button. Therefore, a Power supply is not required. The systems are powered para flow and ensure maximum reduction of hardness with full use of volume capacity.
This means that there are no downtimes, which has a more positive effect on the chemical and microbiological parameters than with conventional pendulum systems.
Regeneration is only carried out with soft water in countercurrent; loading of the resin with hardeners during rinsing is thus excluded;
Brine preparation only with soft water.
Design:
2 glass-fiber-reinforced resin tanks including cation exchange material and support gravel (the filling material is included with the plant delivery)
1 complete two-tank valve combination for top mounting including integrated water metering device
1 set of hardening disks for adaptation to the respective city water conditions
1 brine tank made of transparent PE complete with brine system and protection tube
1 raw water hose
1 hardness measuring set
Type: VM 60
Capacity max: 39 l/min
capacity min: 4 l/min
Regeneration:
Salt consumption / reg.: 1.8 kg
Regeneration time: 45 min
Water consumption / reg.: 132 l
Backwash capacity: 8 l/min
Technical data:
Resin quantity: 2 x 20 l
Salt supply: 114 kg
Operating pressure min/max: 2,5 - 8 bar
connection hard/soft water: 1" / 1-1/4"
Temperature min/max: 2 - 49°C
Dimensions and weight:
Height: 1200 mm
width: 460 mm
depth: 760 mm
Weight: 75 kg
Capacity specifications:
Hardness-   Hardness range    available    Â
disc        °dH to            soft water quantity
1Â Â Â Â Â Â Â Â Â Â Â Â 4Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 12000
2Â Â Â Â Â Â Â Â Â Â Â Â 7Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 6000
3Â Â Â Â Â Â Â Â Â Â Â 10Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 4000
4Â Â Â Â Â Â Â Â Â Â Â 14Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3000
5Â Â Â Â Â Â Â Â Â Â Â 17Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 2400
6Â Â Â Â Â Â Â Â Â Â Â 20Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 2000
7Â Â Â Â Â Â Â Â Â Â Â 24Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1710
8Â Â Â Â Â Â Â Â Â Â Â 26Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1500
These fully automated, quantity-controlled, mechanical twin water softening systems offer, among other aspects, continuous availability of soft water with low salt and water consumption and very easy installation. Thanks to its synthetic components the system is non-corroding. The systems are monitored with a hydraulic control button. Therefore, a Power supply is not required. The systems are powered para flow and ensure maximum reduction of hardness with full use of volume capacity.
This means that there are no downtimes, which has a more positive effect on the chemical and microbiological parameters than with conventional pendulum systems.
Regeneration is only carried out with soft water in countercurrent; loading of the resin with hardeners during rinsing is thus excluded;
Brine preparation only with soft water.
Design:
2 glass-fiber-reinforced resin tanks including cation exchange material and support gravel (the filling material is included with the plant delivery)
1 complete two-tank valve combination for top mounting including integrated water metering device
1 set of hardening disks for adaptation to the respective city water conditions
1 brine tank made of transparent PE complete with brine system and protection tube
1 raw water hose
1 hardness measuring set
Type: VM 60
Capacity max: 39 l/min
capacity min: 4 l/min
Regeneration:
Salt consumption / reg.: 1.8 kg
Regeneration time: 45 min
Water consumption / reg.: 132 l
Backwash capacity: 8 l/min
Technical data:
Resin quantity: 2 x 20 l
Salt supply: 114 kg
Operating pressure min/max: 2,5 - 8 bar
connection hard/soft water: 1" / 1-1/4"
Temperature min/max: 2 - 49°C
Dimensions and weight:
Height: 1200 mm
width: 460 mm
depth: 760 mm
Weight: 75 kg
Capacity specifications:
Hardness-   Hardness range    available    Â
disc        °dH to            soft water quantity
1Â Â Â Â Â Â Â Â Â Â Â Â 4Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 12000
2Â Â Â Â Â Â Â Â Â Â Â Â 7Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 6000
3Â Â Â Â Â Â Â Â Â Â Â 10Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 4000
4Â Â Â Â Â Â Â Â Â Â Â 14Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3000
5Â Â Â Â Â Â Â Â Â Â Â 17Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 2400
6Â Â Â Â Â Â Â Â Â Â Â 20Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 2000
7Â Â Â Â Â Â Â Â Â Â Â 24Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1710
8Â Â Â Â Â Â Â Â Â Â Â 26Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1500
| Description | value |
|---|---|
| Ürün tipi tarifi: | Enthärtung |
| Reg. Trademark: | Kinetico® |
| Description | value |
|---|---|
| WEEE obligation: | No |
| WEEE registration number: | DE 91825945 |